The APN-35 is a standalone two door controller used for connection of two Wiegand type card readers and all the necessary input and outputs associated with two access controlled doors. The APN-35 can also be used for a single door operation with entry/exit readers and anti passback. If the APN-35 becomes disconnected from the host software package the APN-35 continues to operate all functions of the system without reverting to a degraded mode. The APN-35 supports standard proximity and other readers with Wiegand interfaces such as bar code, smart card, biometric, keypad, etc. The APN-35 also supports Magnetic stripe readers utilizing ABA Track 2 encoding. The APN-35 provides complete time zone control of access with its battery-backed real time clock. Up to 1000 events are internally buffered for transmission to PC when communications is restored.
The APN-35 works with ASW Standalone Software Packages
FEATURES:
- Flash memory – Easy firmware upgrade from PC
- 1 or 2 door totally stand-alone operation
- Low power / surface mount technology
- Non-volatile memory for card / PIN storage
- 3000 access cards and /or PINs capacity – Downloaded database
- 8 time zones / 8 access levels / 40 holidays
- 2 intervals per time zone
- Time zone reader mode control
- RS-485 interface (4000 feet cable length)
- 1000 off-line event storage
- Real time clock with battery backup
- Reader tamper and door alarm monitoring
- Supports HID/Motorola/KERI proximity readers and others readers with Wiegand interface.
- 2 strike outputs (2 amp, normally open or closed)
- 2 auxiliary alarm outputs controlled by time zones (additional relays required)
- Anti-passback (when used for single door access control)
- Soft anti-passback (allows entry, logs error for later report generation)
- Secondary password for activating auxiliary outputs
- Forced/held open door and tamper monitoring
- Card only, Card + PIN, Card or PIN, Facility, Locked, and Unlocked reader modes